AN #4 hose fit adapter/speedo – GCF2
$4.46
This fitting is made from brass with 1/4″ NPT female threads on one side and #4 fitting on the other
Part Number: GCF2
Related products
-
$99.48
23′ electric throttle and shift harness for PCM engines – CHEECPCM23
Add to CartCHEECIND23 – This 23″ long harness is a plug-and-play solution for any Livorsi EEC side mount throttle and a PCM marine engine with a PCM transmission.
-
$233.29
Mechanical cable to 5 volt converter – CBME5VD-000020
Add to CartThe Livorsi CBME5VD converter uses your 33c cable to move the Livorsi Velocity sensor. The sensor has two outputs, output one is programmed for a .5v to 4.5 volt output and sensor two is programmed for 4.5 to .5 volt output. As …
-
$26.64
Harness for Livorsi 24 volt analog gauges – DCH24
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER…
-
$54.12
3 pin, 20’ long jack plate wire harness with split loom – DC5VWH-101000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 20’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …