Vantage View Master harness for J1939 and MEFI 4b master gauges – VVMHJI
$83.65
This 3 foot long Vantage View master harness comes with the 12 pin Deutsch connector to plug directly into your master gauge, control pod connecting plug and flying leads to tie into your engine harness.
Part Number: VVMHJI
Tech Help
You will also need:
-
$365.00
3 3/8″ Vantage View Master Tachometer – VJS7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$365.00
Master Tachometer, 3 3/8″ diameter 4000 – VJS4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
Related products
-
$184.17
2 5/8″ 5 volt reference drive trim gauge – DC5VDT
Select optionsLivorsi Marine’s 5 Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$250.77
4 5/8″ 8,000 RPM Tachometer Gauge – DCL8000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 8,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. Like …
-
$199.41
3 3/8″ 4,000 RPM alternator driven tachometer gauge – DC4000DA
Select optionsLivorsi Marine Tachometers are all made in the USA, assembled with solid-state circuit board technology and copper, brass, and anodized aluminum components. This tach is a 3 3/8″ 4000 RPM.
The tachometer is compatible with an ALTERNATOR DRIVEN SIGNAL ONLY. These are available … -
$150.25
2 5/8″ Mechanical Fuel Pressure Gauge 0-15 PSI – DCMFP
Select optionsLivorsi Marine 2 5/8″ 0-15 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …