Autocal Fuel Level Senders
|
|
Livorsi Marine’s new microcontroller-based senders can be distinguished from our
older analog style by an "A" in the part number ex: AFLS, and no trim/adjust potentiometers on the top of the
sender. Senders with aluminum tubing are for oil, diesel, or gasoline of up to 10% ethanol; and senders with
PVC tubing are for potable water. We do not offer units for non-potable water, which leaves conductive
deposits on the sense wire.
- Senses water in fuel, lets you know by moving the gauge needle all the way to the right
- No moving parts to wear out or break
- Reading are not affected by side to side motion or forward movement
- Installs in the standard SAE 5 bolt pattern mounting plate that is used with a float arm style sender
- 2 terminal sender works on both 12 or 24 volts
- 240/33 ohms in stock
- Bendable senders available (special order)
Other ohms resistance available upon request. Tell us the fuel type and ohms resistance of your gauge. Please allow a two week lead time.
|
Programmable Fuel Level Senders
240-33 ohms |
| Length |
Part Number |
| 0-12" |
AFLS12 |
| 13-24" |
AFLS24 |
| 25-36" |
AFLS36 |
| 37-48" |
AFLS48 |
| 49-60" |
AFLS60 |
| 61-72" |
AFLS72 |
| cut & calibrate |
CC FL |
|
|
|
|
Programmable Fuel Level Senders
0-90 ohms |
| Length |
Part Number |
| 0-12" |
AFLS12-0/90 |
| 13-24" |
AFLS24-0/90 |
| 25-36" |
AFLS36-0/90 |
| 37-48" |
AFLS48-0/90 |
| 49-60" |
AFLS60-0/90 |
| 61-72" |
AFLS72-0/90 |
| cut & calibrate |
CC FL |
|
|
Fuel Level Gauges
|
| Mega & Race Series |
Industrial Series |
 |
 |
|
Available in two sizes: 2 1/16" or 2 5/8" cutout
Two ohms resistances: 240-33 ohms or 0-90 ohms
More colors available
For more info click here.
|
2 1/16" cutout
Two ohms resistances: 240-33 ohms or 0-90 ohms
Also available with a white face
For more info click here.
|
|
|
|
Livorsi Marine senders work by measuring capacitance. This means that no moving parts
are required. Electronics in the head convert the measured capacitance to the programmed output of ohms or volts. In
fuel senders, capacitance is measured between the inner-sensing tube and the grounded outer tube, and it requires the
fluid to be non-conductive. In water senders, capacitance is measured between the inner insulated sense wire and the
water, which is grounded by the outer wire.
- No moving parts to wear out or break
- Installs in the standard SAE 5 bolt pattern mounting plate that is used with a float arm style sender
- 2 terminal sender works on both 12 or 24 volts
- 240/33 ohms in stock
|
Water Level Senders
240-33 ohms |
| Length |
Part Number |
| 0-12" |
GSWLC12 |
| 13-24" |
GSWLC24 |
| 25-36" |
GSWLC36 |
| 37-48" |
GSWLC48 |
| 49-60" |
GSWLC60 |
| 61-72" |
GSWLC72 |
| cut & calibrate |
CCWL |
Click here for installation instructions.
Click here for 3 Terminal installation instructions.
|
|
|
Water Level Gauges
|
| Mega & Race Series |
Industrial Series |
 |
 |
|
Available in two sizes: 2 1/16" or 2 5/8" cutout
More colors available
For more info click here.
|
2 1/16" cutout
Also available with a white face
For more info click here.
|
|
|
top
|
 |
|
