3′ long Vantage View Master harness for Mercury Smartcraft gauges – VVMHSC
$162.62
This 36″ long master harness is a plug and play solution when adding a Livorsi Vantage View gauge to your Mercury Smartcraft equipped vessel. The 36″ long harness has a 12 pin Deutsch connector on one end and a NMEA 2000® Micro C Female connector on the other end. This harness also has a 3 pin Amp connector to adapt to a Livorsi Marine control pod or wired toggle switch assembly part number VVSAW.
Part Number: VVMHSC
Tech Help
You will also need:
-
$365.00
3 3/8″ Vantage View Master Tachometer – VJS7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$365.00
Master Tachometer, 3 3/8″ diameter 4000 – VJS4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
Related products
-
$184.17
2 5/8″ 5 volt reference rudder position gauge – DC5VRD
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$54.12
3 pin, 20’ long jack plate wire harness with split loom – DC5VWH-101000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 20’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$250.77
4 5/8″ 8,000 RPM Tachometer Gauge – DCL8000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 8,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. Like …
-
$250.77
4 5/8″ 6,000 RPM Tachometer Gauge – DCL6000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 6,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines and any 12- Pole Outboard ignition system. …