Harness for Livorsi 24 volt analog gauges – DCH24
$26.64
These factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER
This harness has built-in resistors to reduce the voltage from a 24-volt system to the 12 volts required by all Livorsi gauges.
Part Number: DCH24
Tech Help
Related products
-
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-90 PSI – DCFP90
Select optionsLivorsi Mega and Race series 90 PSI fuel pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$30.06
Bob’s Machine jack plate sender adaptor harness – BJPAWH-000000
Add to CartBob’s Machine jack plate sender adaptor harness
-
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-15 PSI – DCFP
Select optionsLivorsi Mega and Race series 15 PSI fuel pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$199.41
3 3/8″ 4,000 RPM alternator driven tachometer gauge – DC4000DA
Select optionsLivorsi Marine Tachometers are all made in the USA, assembled with solid-state circuit board technology and copper, brass, and anodized aluminum components. This tach is a 3 3/8″ 4000 RPM.
The tachometer is compatible with an ALTERNATOR DRIVEN SIGNAL ONLY. These are available …