Harness for Livorsi analog gauges – DCH
$15.59
These factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER
Part Number: DCH
Tech Help
Related products
-
$184.17
6 pin, 20’ long jack plate wire harness with split loom – DC5VWH-000000
Add to CartThis harness is best used for our 5-volt gauges that connect to the Livorsi marine rotary position sensor. An ideal application for this harness is a rudder or jet pump bucket position indicator. This harness is 20’ long, protected in split …
-
$117.58
2 5/8″ Electric Fuel Level Gauge 240-33 OHMS – DCFL
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
-
$117.58
2 5/8″ Electric Fuel Level Gauge 0-90 OHMS – DCFLGM
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 0 to 90 …
-
$199.41
3 3/8″ 4,000 RPM magneto driven tachometer gauge – DC4000MPD
Select optionsLivorsi Marine Tachometers are all made in the USA, assembled with solid-state circuit board technology and copper, brass, and anodized aluminum components. This is a 3 3/8″ 4000 RPM.
The tachometer is compatible with a MAGNETIC PROBE DRIVEN SIGNAL ONLY. These are available …