NMEA 0183 10Hz GPS antenna – GPSSQ310X
$225.12
This standard GPS antenna is supplied with ring terminals. These antennas easily connect to all Livorsi analog GPS speedometers. Operating at 10Hz, this unit outputs NMEA 0183 messages at 38,400 baud, or simply put, updating your speed ten times per second. This antenna will keep up with just about any high-performance boat. It will drive your Livorsi speedometer for years to come and requires no subscription to operate. This antenna’s default NMEA output messages are GGA, GSA, RMC, VTG, and GSV.
Part Number: GPSSQ310X
Tech Help
Related products
-
$238.67
NMEA 0183 10Hz GPS 8 and 16k pulse output antenna – GPSESQ3
Add to CartThis unique GPS antenna converts a GPS NMEA 0183 signal to standard automotive speedometer pulse output. There are two settings for this pulse antenna; it can output 8k or 16k pulses per mile, depending on how you wire the antenna to …
-
$37.68
Water temperature sender 1/2″ NPT – GSWT1/2
Add to CartThis analog temperature sender works specifically with Livorsi analog 100-250° F Water Temperature gauges. This sender connects to the engine block with a 1/2″ NPT thread. When installing the sender for your gauge onto the engine, do NOT use any sealant …
-
$66.57
0-100 PSI oil pressure sender – GSOP
Add to CartThis analog 0-100 PSI oil pressure sender works specifically with Livorsi analog 0-100 PSI pressure gauge.This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge onto the engine, do NOT use …
-
$76.73
0-100 PSI oil pressure sender with isolated ground – GSOPI
Add to CartThis analog 0-100 PSI oil pressure sender works specifically with Livorsi analog 0-100 PSI pressure gauge.This sender connects to the engine block with a 1/8″ NPT thread. This sender does not get it’s ground from the engine block, rather it …