NMEA 2000® Micro C male Vantage View Master Harness – VVMHN2K
$114.25
This master harness is a plug and play solution when adding a Livorsi Vantage View gauge to your NMEA 2000 equipped vessel. The 36″ long harness has a 12 pin Deutsch connector on one end and a NMEA 2000® Micro C male connector on the other end. This harness also has a 3 pin Amp connector to adapt to a Livorsi Marine control pod or wired toggle switch assembly part number VVSAW.
Part Number: VVMHN2K
Tech Help
You will also need:
-
$365.00
3 3/8″ Vantage View Master Tachometer – VJS7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$365.00
Master Tachometer, 3 3/8″ diameter 4000 – VJS4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 3 3/8″ cut out and 3 7/8″ overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL7K
Select optionsThis Vantage View 7,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
-
$400.00
4 5/8″ Vantage View Master Tachometer – VJL4K
Select optionsThis Vantage View 4,000 RPM master gauge has a 4 5/8″ cutout and 5″overall size. This master gauge is the brain behind the Vantage View system, it receives CAN messaging from the engine ECU and displays the engine data both on the LCD …
Related products
-
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-15 PSI – DCFP
Select optionsLivorsi Mega and Race series 15 PSI fuel pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$250.77
4 5/8″ 8,000 RPM Tachometer Gauge – DCL8000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 8,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. Like …
-
$63.29
3 pin, 25’ long Jack plate wire harness with split loom – DC5VWH-201000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 25’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-90 PSI – DCFP90
Select optionsLivorsi Mega and Race series 90 PSI fuel pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …