New! Data Gateway

With the Livorsi Data Gateway you can export CAN (Controller Area Network) engine data to a NMEA 2000® device and display engine data. For use with Vantage View® gauges or a NMEA 2000® navigation device such as Garmin, Lowrance or Raymarine.

Livorsi's Data Gateway simply plugs into a standard NMEA 2000® Tee connector which can be hooked directly to your device. On the engine side it will interface via CAN+ / CAN- wires to gather the information and sends it to a screen and /or gauges.

Please note that engine data is only transmitted if there is a sensor to support it.

View our Data Gateway info sheet to view the list of NMEA 2000 and SAE J1939 output parameters. (PDF, 320 KB)

Possible Configurations

Mercury In-Line Gateways

The new Mercury® Gateway converts SmartCraft® engine and system data to NMEA 2000® protocol for use on non-Mercury gauges and displays such as our Adjustable Position LED Indicators.

Note: Gateway will not provide operation power for devices on the NMEA 2000® network.

Included with Gateway

• Module
• 4 mounting screws
• N2K Tee
• installation instructions

Related Products

• SmartCraft® Merc Monitor
• NMEA 2000® Harnessing
• Garmin displays
• Vantage View® Gauges
• LED Position Indicators

top

Livorsi Marine Inc. 715 Center Street Grayslake IL 60030
Copyright © Livorsi Marine Inc.^® All Rights Reserved.
Accessibility Statement