What Gauges Are Right for My Engine?
Analog Gauges
Livorsi electric analog gauges use a sensor connected to the engine to send readings to the gauge via a signal wire. The only exception is the voltmeter, which reads directly from any 12-volt source on the boat.
Livorsi mechanical analog gauges measure fluid or pressure directly from a line connected to the engine or transmission. These gauges are compatible with any engine using analog sensors (sold separately).
All Livorsi analog gauges include red LED backlighting by default. Our 2-1/16” gauges are only available with red LEDs, while larger sizes offer swappable LED colors to suit your style. Most models feature plug-and-play Deutsch connectors for quick and reliable installation, though a few exceptions apply.
Vantage View (CAN Bus) Gauges
Vantage View—often referred to as CAN bus gauges—receive data directly from your engine’s ECM (Engine Control Module). These digital gauges are compatible with Mercury SmartCraft, NMEA 2000, J1939, and MEFI 4b CAN protocols. Because they rely on digital engine data, Vantage View gauges are only compatible with fuel-injected engines that support one of the above CAN bus systems. They come with red LED backlighting and feature the same plug-and-play Deutsch connectors for simple, secure connections.
-
3 3/8″ 140 MPH GPS Speedometer Gauge – GPSS140
Select optionsLivorsi Mega and Race series 140 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 100 MPH GPS Speedometer Gauge – GPSS100
Select optionsLivorsi Mega and Race series 100 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
4 5/8″ 200 MPH GPS Speedometer Gauge – GPSL200
Select optionsLivorsi Mega and Race series 200 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
4 5/8″ 180 MPH GPS Speedometer Gauge – GPSL180
Select optionsLivorsi Mega and Race series 180 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
Depth finder gauge kit – DFGTHW-MB
Add to CartThe DepthTrax 2BX Boat-Mount Depth Sounder with integrated air and water temperature sensors utilizes advanced SONAR technology and sophisticated algorithmic programming to produce accurate depth readings four times every second, reaching as deep as 600 feet. Its precision also extends to …
-
0 to 15 PSI fuel pressure sender – GSFPWP
Add to CartThis analog 0-15 PSI fuel or water pressure sender works specifically with the Livorsi analog 0-15 PSI fuel pressure gauge. This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge onto the …
-
0-60 or 90 PSI fuel pressure sender – GSFP6090
Add to CartThis analog 0-60 or 0-90 PSI fuel pressure sender works specifically with the Livorsi analog 0-60 or 0-90 PSI fuel pressure gauge. This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge …
-
3 3/8″ 60 MPH GPS Ski Speedometer Gauge – GPSS60
Select optionsLivorsi Mega and Race series 60 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges aremanufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi GPS …
-
3 3/8″ 80 MPH GPS Speedometer Gauge – GPSS80
Select optionsLivorsi Mega and Race series 80 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 50 MPH GPS Speedometer Gauge – GPSS50
Select optionsLivorsi Mega and Race series 50 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 200 MPH GPS Speedometer Gauge – GPSS200
Select optionsLivorsi Mega and Race series 200 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 160 MPH GPS Speedometer Gauge – GPSS160
Select optionsLivorsi Mega and Race series 160 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 180 MPH GPS Speedometer Gauge – GPSS180
Select optionsLivorsi Mega and Race series 180 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
3 3/8″ 120 MPH GPS Speedometer Gauge – GPSS120
Select optionsLivorsi Mega and Race series 120 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
4 5/8″ 80 MPH GPS Speedometer Gauge – GPSL80
Select optionsLivorsi Mega and Race series 80 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufctured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi GPS antenna (…
-
4 5/8″ 50 MPH GPS Speedometer Gauge – GPSL50
Select optionsLivorsi Mega and Race series 50 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
4 5/8″ 60 MPH GPS Ski Speedometer Gauge – GPSL60
Select optionsLivorsi Mega and Race series 60 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
4 5/8″ 140 MPH GPS Speedometer Gauge – GPSL140
Select optionsLivorsi Mega and Race series 140 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
4 5/8″ 160 MPH GPS Speedometer Gauge – GPSL160
Select optionsLivorsi Mega and Race series 160 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
4 5/8″ 100 MPH GPS Speedometer Gauge – GPSL100
Select optionsLivorsi Mega and Race series 100 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
4 5/8″ 120 MPH GPS Speedometer Gauge – GPSL120
Select optionsLivorsi Mega and Race series 120 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
GPS recall switch bezel – FLGPSRS
Select options This product has multiple variants. The options may be chosen on the product pageThe GPS recall switch bezel is machined from aluminum and available in all 12 Livorsi standard colors.
-
2 5/8″ Electric Water Temperature Gauge 100-280 – DCWT
Select optionsLivorsi Mega and Race series 100 to 280 F water temperature gauge has a standard size of 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible …
-
2 5/8″ Electric Water Level Gauge – DCWL
Select optionsLivorsi Mega and Race series water level gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.