Electric gauge functions
- Fuel and water level
- Fuel and oil pressure
- Drive trim
- Water, oil and transmission temperature
- Volt meter
- Tab(s)
- Rudder or jet bucket position
- Tachometer
- GPS speedometer
Mechanical gauge functions
- Vacuum / boost and boost
- Fuel, oil and water pressure
- Speedometer
Gauge sizes
- 2 1/16” – available rims are Mega, Race, and SAE
- 2 5/8” – available rims are Mega and Race
- 3 3/8” – available rims are Mega, Race, and SAE
- 4 5/8” – available rims are Mega and Race
-
$199.41
3 3/8″ 10,000 RPM Tachometer Gauge – DCS10000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 10,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12 Pole Outboard ignition system. These …
-
$199.41
3 3/8″ 12,000 RPM Tachometer Gauge – DCS12000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 12,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines and any 12- Pole Outboard ignition system. …
-
$117.58
2 5/8″ Electric Oil Pressure Gauge 0-80 PSI – DCOP80
Select optionsLivorsi Mega and Race series 80 PSI oil pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$117.58
2 5/8″ Electric Oil Temperature Gauge – DCOT
Select optionsLivorsi Mega and Race series 140 to 340 F oil temperature gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
-
$150.25
2 5/8″ Mechanical Water Pressure Gauge 0-60 PSI – DCMWP60
Select optionsLivorsi Marine 2 5/8″ 0-60 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$117.58
2 5/8″ Electric Oil Pressure Gauge 0-100 PSI – DCOP
Select optionsLivorsi Mega and Race series 100 PSI oil pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$150.25
2 5/8″ Mechanical Vacuum Boost Gauge – DCMVB
Select optionsLivorsi Marine 2 5/8″ mechanical vacuum boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting that will adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 5/8″ …
-
$150.25
2 5/8″ Mechanical Water Pressure Gauge 0-35 PSI – DCMWP
Select optionsLivorsi Marine 2 5/8″ 0-35 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting that can adapt a barb fitting and ferrule compression-type fittings. This gauge …
-
$212.53
3 3/8″ 60 MPH Mechanical Speedometer Gauge – DCMS60
Select optionsThe Livorsi Mega and Race series mechanical 60 MPH speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge can be connected …
-
$212.53
3 3/8″ 80 MPH Mechanical Speedometer Gauge – DCMS80
Select optionsThe Livorsi Mega and Race series mechanical 80 MPH speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge can be connected …
-
$212.53
3 3/8″ 100 MPH Mechanical Speedometer Gauge – DCMS100
Select optionsThe Livorsi Mega and Race series mechanical 100 MPH speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge can be connected …
-
$150.25
2 5/8″ Mechanical Oil Pressure Gauge 0-100 PSI – DCMOP
Select optionsLivorsi Marine 2 5/8″ 100 PSI mechanical oil pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting that will adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$284.65
4 5/8″ 100 MPH Mechanical Speedometer Gauge – DCML100
Select optionsThe Livorsi Mega and Race series mechanical 100 MPH speedometer gauge has a 4 5/8″ cut-out and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge can be connected to your engine’s …
-
$284.65
4 5/8″ 80 MPH Mechanical Speedometer Gauge – DCML80
Select optionsThe Livorsi Mega and Race series mechanical 80 MPH speedometer gauge has a 4 5/8″ cut-out and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge can be connected to your engine’s …
-
$150.25
2 5/8″ Mechanical Fuel Pressure Gauge 0-100 PSI – DCMFP100
Select optionsLivorsi Marine 2 5/8″ 100 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 5/8″ …
-
$150.25
2 5/8″ Mechanical Boost Gauge 0-35 PSI – DCMB35
Select optionsLivorsi Marine 2 5/8″ 0-35 PSI mechanical boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$150.25
2 5/8″ Mechanical Fuel Pressure Gauge 0-15 PSI – DCMFP
Select optionsLivorsi Marine 2 5/8″ 0-15 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$250.77
4 5/8″ 6,000 RPM Tachometer Gauge – DCL6000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 6,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines and any 12- Pole Outboard ignition system. …
-
$250.77
4 5/8″ 8,000 RPM Tachometer Gauge – DCL8000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 8,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. Like …
-
$26.64
Harness for Livorsi 24 volt analog gauges – DCH24
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER…
-
$250.77
4 5/8″ 10,000 RPM Tachometer Gauge – DCL10000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 4 5/8″ 10,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. Like …
-
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-90 PSI – DCFP90
Select optionsLivorsi Mega and Race series 90 PSI fuel pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$15.59
Harness for Livorsi analog gauges – DCH
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER -
$117.58
2 5/8″ Electric Fuel Pressure Gauge 0-15 PSI – DCFP
Select optionsLivorsi Mega and Race series 15 PSI fuel pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.