Electric gauge functions
- Fuel and water level
- Fuel and oil pressure
- Drive trim
- Water, oil and transmission temperature
- Volt meter
- Tab(s)
- Rudder or jet bucket position
- Tachometer
- GPS speedometer
Mechanical gauge functions
- Vacuum / boost and boost
- Fuel, oil and water pressure
- Speedometer
Gauge sizes
- 2 1/16” – available rims are Mega, Race, and SAE
- 2 5/8” – available rims are Mega and Race
- 3 3/8” – available rims are Mega, Race, and SAE
- 4 5/8” – available rims are Mega and Race
-
$117.58
2 5/8″ Electric Fuel Level Gauge 240-33 OHMS – DCFL
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
-
$117.58
2 5/8″ Electric Fuel Level Gauge 0-90 OHMS – DCFLGM
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 0 to 90 …
-
$63.29
3 pin, 25’ long Jack plate wire harness with split loom – DC5VWH-201000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 25’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$60.12
6 pin 20’ long jack plate wire harness with heat shrink – DC5VWH-010000
Add to CartThis harness is best used for our 5-volt gauges that connect to the Livorsi marine rotary position sensor. An ideal application for this harness is a rudder or jet pump bucket position indicator. This harness is 20’ long, protected in heat …
-
$54.12
3 pin, 20’ long jack plate wire harness with split loom – DC5VWH-101000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 20’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$184.17
6 pin, 20’ long jack plate wire harness with split loom – DC5VWH-000000
Add to CartThis harness is best used for our 5-volt gauges that connect to the Livorsi marine rotary position sensor. An ideal application for this harness is a rudder or jet pump bucket position indicator. This harness is 20’ long, protected in split …
-
$184.17
2 5/8″ 5 volt reference starboard trim tab indicator gauge – DC5VTTS
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference port trim tab indicator gauge – DC5VTTP
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference trim tab indicator gauge – DC5VTT
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference jack plate position gauge – DC5VJP
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference rudder position gauge – DC5VRD
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference jet bucket position gauge – DC5VJBB
Select optionsLivorsi Marine’s 5-Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$184.17
2 5/8″ 5 volt reference drive trim gauge – DC5VDT
Select optionsLivorsi Marine’s 5 Volt Gauges offer precise, reliable monitoring for both position and pressure/vacuum applications across a wide range of marine systems. Ideal for trim tabs, rudders, jack plates, throttle position, valves, and more, these gauges supply their own 5VDC …
-
$199.41
3 3/8″ 4,000 RPM magneto driven tachometer gauge – DC4000MPD
Select optionsLivorsi Marine Tachometers are all made in the USA, assembled with solid-state circuit board technology and copper, brass, and anodized aluminum components. This is a 3 3/8″ 4000 RPM.
The tachometer is compatible with a MAGNETIC PROBE DRIVEN SIGNAL ONLY. These are available … -
$199.41
3 3/8″ 4,000 RPM alternator driven tachometer gauge – DC4000DA
Select optionsLivorsi Marine Tachometers are all made in the USA, assembled with solid-state circuit board technology and copper, brass, and anodized aluminum components. This tach is a 3 3/8″ 4000 RPM.
The tachometer is compatible with an ALTERNATOR DRIVEN SIGNAL ONLY. These are available … -
$30.06
Bob’s Machine jack plate sender adaptor harness – BJPAWH-000000
Add to CartBob’s Machine jack plate sender adaptor harness
-
$40.45
10 foot hose kit for Livorsi mechanical gauge – HKA
Add to CartTUBING, NYLON, 1/8″, 10FT. LENGTH, INCL. 1/8″ NPT BRASS COMPRESSION FITTINGS
-
$31.49
25 foot hose kit for Livorsi mechanical gauge – HK
Add to CartTUBING, NYLON, 1/8″, 25FT. LENGTH, INCL. 1/8″ NPT BRASS COMPRESSION FITTINGS
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.