What Gauges Are Right for My Engine?
Analog Gauges
Livorsi electric analog gauges use a sensor connected to the engine to send readings to the gauge via a signal wire. The only exception is the voltmeter, which reads directly from any 12-volt source on the boat.
Livorsi mechanical analog gauges measure fluid or pressure directly from a line connected to the engine or transmission. These gauges are compatible with any engine using analog sensors (sold separately).
All Livorsi analog gauges include red LED backlighting by default. Our 2-1/16” gauges are only available with red LEDs, while larger sizes offer swappable LED colors to suit your style. Most models feature plug-and-play Deutsch connectors for quick and reliable installation, though a few exceptions apply.
Vantage View (CAN Bus) Gauges
Vantage View—often referred to as CAN bus gauges—receive data directly from your engine’s ECM (Engine Control Module). These digital gauges are compatible with Mercury SmartCraft, NMEA 2000, J1939, and MEFI 4b CAN protocols. Because they rely on digital engine data, Vantage View gauges are only compatible with fuel-injected engines that support one of the above CAN bus systems. They come with red LED backlighting and feature the same plug-and-play Deutsch connectors for simple, secure connections.
-
$117.58
2 5/8″ Electric Transmission Temperature Gauge – DCTT
Select optionsLivorsi Mega and Race series 140 to 340 F transmission temperature gauge has a standard size of 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible …
-
$117.58
2 5/8″ Electric Volt Meter Gauge – DCVM
Select optionsLivorsi Mega and Race series 8 to 18 voltmeter gauge have a 2 5/8″ cutout and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge does not require a sender, so the sender …
-
$117.58
2 5/8″ Electric OMC Trim Meter Gauge – DCTMO
Select optionsLivorsi Mega and Race series OMC 88 to ohms trim gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge is available …
-
$85.55
2 1/16″ Electric Water Temperature Gauge 100-280 – DCSWT
Select optionsLivorsi Mega and Race series 100 to 280 F water temperature gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
-
$117.58
2 5/8″ Electric Mercury Trim Meter Gauge – DCTMM
Select optionsLivorsi Mega and Race series Mercury Marine trim gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge is available in 5 …
-
$85.55
2 1/16″ Electric Volt Meter Gauge – DCSVM
Select optionsLivorsi Mega and Race series 8 to 18 voltmeter gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge does not require a sender, …
-
$85.55
2 1/16″ Electric Water Level Gauge – DCSWL
Select optionsLivorsi Mega and Race series water level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
-
$85.55
2 1/16″ Electric OMC Trim Meter Gauge – DCSTMO
Select optionsLivorsi Mega and Race series OMC 88 to 1 ohms trim gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge is available …
-
$85.55
2 1/16″ Electric Transmission Temperature Gauge – DCSTT
Select optionsLivorsi Mega and Race series 140 to 340 F transmission temperature gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
-
$85.55
2 1/16″ Electric Mercury Trim Meter Gauge – DCSTMM
Select optionsLivorsi Mega and Race series Mercury Marine trim gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge has 5 standard dial …
-
$85.55
2 1/16″ Electric Oil Temperature Gauge – DCSOT
Select optionsLivorsi Mega and Race series 140 to 340 F oil temperature gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
-
$85.55
2 1/16″ Electric Oil Pressure Gauge 0-80 PSI – DCSOP80
Select optionsLivorsi Mega and Race series 80 PSI oil pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$99.59
2 1/16″ Mechanical Water Pressure Gauge 0-60 PSI – DCSMWP60
Select optionsLivorsi Marine 2 1/16″ 0-60 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$85.55
2 1/16″ Electric Oil Pressure Gauge 0-100 PSI – DCSOP
Select optionsLivorsi Mega and Race series 100 PSI oil pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$99.59
2 1/16″ Mechanical Water Pressure Gauge 0-35 PSI – DCSMWP
Select optionsLivorsi Marine 2 1/16″ 0-35 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$99.59
2 1/16″ Mechanical Oil Pressure Gauge 0-100 PSI – DCSMOP
Select optionsLivorsi Marine 2 1/16″ 100 PSI mechanical oil pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$99.59
2 1/16″ Mechanical Vacuum Boost Gauge – DCSMVB
Select optionsLivorsi Marine 2 1/16″ mechanical vacuum boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ cutout …
-
$99.59
2 1/16″ Mechanical Fuel Pressure Gauge 0-100 PSI – DCSMFP100
Select optionsLivorsi Marine 2 1/16″ 100 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$99.59
2 1/16″ Mechanical Boost Gauge 0-35 PSI – DCSMB35
Select optionsLivorsi Marine 2 1/16″ 0-35 PSI mechanical boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$99.59
2 1/16″ Mechanical Fuel Pressure Gauge 0-15 PSI – DCSMFP
Select optionsLivorsi Marine 2 1/16″ 0-15 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$85.55
2 1/16″ Electric Fuel Pressure Gauge 0-90 PSI – DCSFP90
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi GSFP60/90 …
-
$85.55
2 1/16″ Electric Fuel Pressure Gauge 0-15 PSI – DCSFP
Select optionsLivorsi Mega and Race series 15 PSI fuel pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$85.55
2 1/16″ Electric Fuel Level Gauge 0-90 OHMS – DCSFLGM
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 0-90 …
-
$85.55
2 1/16″ Electric Fuel Level Gauge 240-33 OHMS – DCSFL
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.