What Gauges Are Right for My Engine?
Analog Gauges
Livorsi electric analog gauges use a sensor connected to the engine to send readings to the gauge via a signal wire. The only exception is the voltmeter, which reads directly from any 12-volt source on the boat.
Livorsi mechanical analog gauges measure fluid or pressure directly from a line connected to the engine or transmission. These gauges are compatible with any engine using analog sensors (sold separately).
All Livorsi analog gauges include red LED backlighting by default. Our 2-1/16” gauges are only available with red LEDs, while larger sizes offer swappable LED colors to suit your style. Most models feature plug-and-play Deutsch connectors for quick and reliable installation, though a few exceptions apply.
Vantage View (CAN Bus) Gauges
Vantage View—often referred to as CAN bus gauges—receive data directly from your engine’s ECM (Engine Control Module). These digital gauges are compatible with Mercury SmartCraft, NMEA 2000, J1939, and MEFI 4b CAN protocols. Because they rely on digital engine data, Vantage View gauges are only compatible with fuel-injected engines that support one of the above CAN bus systems. They come with red LED backlighting and feature the same plug-and-play Deutsch connectors for simple, secure connections.
-
$90.06
2 1/16″ Electric Volt Meter Gauge – DCSVM
Select optionsLivorsi Mega and Race series 8 to 18 voltmeter gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge does not require a sender, …
-
$90.06
2 1/16″ Electric Oil Temperature Gauge – DCSOT
Select optionsLivorsi Mega and Race series 140 to 340 F oil temperature gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
-
$90.06
2 1/16″ Electric Mercury Trim Meter Gauge – DCSTMM
Select optionsLivorsi Mega and Race series Mercury Marine trim gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge has 5 standard dial …
-
$90.06
2 1/16″ Electric OMC Trim Meter Gauge – DCSTMO
Select optionsLivorsi Mega and Race series OMC 88 to 1 ohms trim gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This trim gauge is available …
-
$90.06
2 1/16″ Electric Oil Pressure Gauge 0-80 PSI – DCSOP80
Select optionsLivorsi Mega and Race series 80 PSI oil pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$90.06
2 1/16″ Electric Oil Pressure Gauge 0-100 PSI – DCSOP
Select optionsLivorsi Mega and Race series 100 PSI oil pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$104.83
2 1/16″ Mechanical Vacuum Boost Gauge – DCSMVB
Select optionsLivorsi Marine 2 1/16″ mechanical vacuum boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ cutout …
-
$104.83
2 1/16″ Mechanical Water Pressure Gauge 0-35 PSI – DCSMWP
Select optionsLivorsi Marine 2 1/16″ 0-35 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$104.83
2 1/16″ Mechanical Water Pressure Gauge 0-60 PSI – DCSMWP60
Select optionsLivorsi Marine 2 1/16″ 0-60 PSI mechanical water pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$104.83
2 1/16″ Mechanical Fuel Pressure Gauge 0-100 PSI – DCSMFP100
Select optionsLivorsi Marine 2 1/16″ 100 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$104.83
2 1/16″ Mechanical Oil Pressure Gauge 0-100 PSI – DCSMOP
Select optionsLivorsi Marine 2 1/16″ 100 PSI mechanical oil pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$104.83
2 1/16″ Mechanical Boost Gauge 0-35 PSI – DCSMB35
Select optionsLivorsi Marine 2 1/16″ 0-35 PSI mechanical boost gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has a 2 1/16″ …
-
$104.83
2 1/16″ Mechanical Fuel Pressure Gauge 0-15 PSI – DCSMFP
Select optionsLivorsi Marine 2 1/16″ 0-15 PSI mechanical fuel pressure gauge is made in the USA with the highest quality brass and copper internal components. These gauges use a 1/8″ NPT fitting to adapt a barb fitting and ferrule compression-type fittings. This gauge has …
-
$90.06
2 1/16″ Electric Fuel Pressure Gauge 0-90 PSI – DCSFP90
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi GSFP60/90 …
-
$90.06
2 1/16″ Electric Fuel Level Gauge 0-90 OHMS – DCSFLGM
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 0-90 …
-
$90.06
2 1/16″ Electric Fuel Pressure Gauge 0-15 PSI – DCSFP
Select optionsLivorsi Mega and Race series 15 PSI fuel pressure gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$209.90
3 3/8″ 6,000 RPM Tachometer Gauge – DCS6000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 6,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. These …
-
$209.90
3 3/8″ 8,000 RPM Tachometer Gauge – DCS8000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 8,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12-pole Outboard ignition system. These …
-
$90.06
2 1/16″ Electric Fuel Level Gauge 240-33 OHMS – DCSFL
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
-
$209.90
3 3/8″ 10,000 RPM Tachometer Gauge – DCS10000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 10,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines with any 12 Pole Outboard ignition system. These …
-
$209.90
3 3/8″ 12,000 RPM Tachometer Gauge – DCS12000
Select optionsLivorsi Marine Tachometers are all made in the USA and assembled with solid-state circuit board technology and anodized aluminum components. Pictured is a 3 3/8″ 12,000 RPM Tachometer. All tachometers are compatible with 4, 6, 8, and 10-cylinder engines and any 12- Pole Outboard ignition system. …
-
$123.77
2 5/8″ Electric Oil Pressure Gauge 0-100 PSI – DCOP
Select optionsLivorsi Mega and Race series 100 PSI oil pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$123.77
2 5/8″ Electric Oil Pressure Gauge 0-80 PSI – DCOP80
Select optionsLivorsi Mega and Race series 80 PSI oil pressure gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with Livorsi …
-
$123.77
2 5/8″ Electric Oil Temperature Gauge – DCOT
Select optionsLivorsi Mega and Race series 140 to 340 F oil temperature gauge has a standard size 2 5/8″ cut out and an overall diameter of 2 3/4″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.