-
$15.41
Four piece diode kit for Livorsi throttles – DK
Add to CartDiodes only, 4-piece kit. A diode is a electronic component that acts like a one-way check valve, Allowing current to flow easily in one direction while blocking it in the opposite direction. This is commonly used when using one control …
-
$28.91
Harness for Livorsi 24 volt analog gauges – DCH24
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER…
-
$16.92
Harness for Livorsi analog gauges – DCH
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER -
$66.62
3 pin, 25’ long Jack plate wire harness with split loom – DC5VWH-201000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 25’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$56.97
3 pin, 20’ long jack plate wire harness with split loom – DC5VWH-101000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 20’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$63.29
6 pin 20’ long jack plate wire harness with heat shrink – DC5VWH-010000
Add to CartThis harness is best used for our 5-volt gauges that connect to the Livorsi marine rotary position sensor. An ideal application for this harness is a rudder or jet pump bucket position indicator. This harness is 20’ long, protected in heat …
-
$66.62
6 pin, 20’ long jack plate wire harness with split loom – DC5VWH-000000
Add to CartThis harness is best used for our 5-volt gauges that connect to the Livorsi marine rotary position sensor. An ideal application for this harness is a rudder or jet pump bucket position indicator. This harness is 20’ long, protected in split …
-
$65.06
Foot throttle harness for PCM engines – CHPCM15
Add to CartThis 15-foot-long harness is best used in airboats. One end plugs into the Livorsi foot throttle, part number EFP, and the other into a Pleasurecraft Marine engine.
-
$107.95
23′ electric throttle and shift harness for PCM engines – CHEECPCM23
Add to CartCHEECIND23 – This 23″ long harness is a plug-and-play solution for any Livorsi EEC side mount throttle and a PCM marine engine with a PCM transmission.
-
$173.51
23′ electric throttle and shift harness for Indmar engines – CHEECIND23
Add to CartThis 23″ long harness is a plug-and-play solution for any Livorsi EEC side-mount throttle and an Indmar marine engine with a Velvet Drive transmission.
-
$31.64
Bob’s Machine jack plate sender adaptor harness – BJPAWH-000000
Add to CartBob’s Machine jack plate sender adaptor harness
-
Price range: $40.40 through $79.86
Tab controller to trim tab harness – LTCOWH
Select optionsRequired for both LTPBK and LTPLEDBK Livorsi trim tab controllers, these harnesses, available in multiple lengths, will connect each tab to the controller. One harness required per tab.
-
Price range: $86.78 through $200.10
LED indicator main harness – LED2HSA
Select options This product has multiple variants. The options may be chosen on the product pageThis main harness is required for all Livorsi Adjustable LED Position Indicators. It provides power to the indicator, delivers a 5-volt reference signal to your tab or drive sensors, and returns accurate sensor readings for real-time display. In addition to …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.