1/8″ ID push on speedometer hose – GCH18
$2.48
Ideal for pitot-style speedometers, 1/8″ ID push-on hose is sold by the foot.
Part Number: GCH18
Related products
-
$15.59
Harness for Livorsi analog gauges – DCH
Add to CartThese factory-assembled harnesses plug into all Livorsi analog gauges. Populated in all 4 of the DT06-4S sockets are the following 24″ long wires:
GREEN WIRE – SIGNAL
BLUE WIRE – LIGHTING
BLACK WIRE – GROUND
VIOLET WIRE – 12V POWER -
$54.12
3 pin, 20’ long jack plate wire harness with split loom – DC5VWH-101000
Add to CartThis harness is best used for our 5-volt gauges that connect to your 5-volt sensor. An ideal application for this harness is a pressure gauge. This harness is 20’ long, protected in split loom sleeving, and plugs directly into our 2 5/8″ 5-volt …
-
$233.29
Mechanical cable to 5 volt converter – CBME5VD-000020
Add to CartThe Livorsi CBME5VD converter uses your 33c cable to move the Livorsi Velocity sensor. The sensor has two outputs, output one is programmed for a .5v to 4.5 volt output and sensor two is programmed for 4.5 to .5 volt output. As …
-
$405.15
24″ stroke actuator – ACB-24
Add to Cart32.8″ in the closed position, center to center, and 56.85″ in the open position, center to center. When running at 12 volts DC, these actuators have a push and pull force of 450 lbs.