Autocal Fuel Level Senders – AFLS
Price range: $241.63 through $273.85
Livorsi Marine’s AutoCal fuel level senders feature advanced microcontroller technology and are easy to identify by an “A” in the part number (e.g., AFLS) and the absence of trim or adjust potentiometers on the top. These senders have no moving parts, making them more reliable and durable than traditional float-arm styles. Aluminum tube models are designed for gasoline (up to 10% ethanol), diesel, or oil. PVC tube models are for potable water only — we do not offer units for non-potable water due to the risk of conductive buildup on the sensor wire.
These senders also detect water in fuel, signaling the issue by moving the gauge needle all the way to the right. They install using the standard SAE 5-bolt mounting pattern, work with both 12V and 24V systems and include two terminals for installation. Standard output is 240–33 ohms, with bendable models available by special order.
Tech Help
You will also need:
-
Price range: $43.65 through $128.94
Fuel and water level sender – SFW
Select optionsSFW Fuel/Water level senders are suitable for gas, diesel, and water. Measurement is done by a series of reed switches positioned inside the level tube. A float with built-in magnets then triggers the reed relays, generating a potential-free resistance …
-
$85.55
2 1/16″ Electric Fuel Level Gauge 240-33 OHMS – DCSFL
Select optionsLivorsi Mega and Race series fuel level gauge has a standard size 2 1/16″ cut out and an overall diameter of 2 3/8″. These gauges are made in the USA with non-corrosive materials and easy-to-install Deutsch connectors. This gauge is compatible with any 240 to 33 …
-
$646.69
Single function LED indicator – ALEDI1X
Select optionsLivorsi Adjustable LED Position Indicators
Smarter Feedback. Cleaner Dash. Better Boating.
Take the guesswork out of trim, tabs, rudder angle, jack plates, and tank levels with Livorsi’s Adjustable LED Position Indicators—your all-in-one solution for precise, real-time monitoring on …
Related products
-
$66.57
0-100 PSI oil pressure sender – GSOP
Add to CartThis analog 0-100 PSI oil pressure sender works specifically with Livorsi analog 0-100 PSI pressure gauge.This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge onto the engine, do NOT use …
-
$233.29
Mechanical cable to 5 volt converter – CBME5VD-000020
Add to CartThe Livorsi CBME5VD converter uses your 33c cable to move the Livorsi Velocity sensor. The sensor has two outputs, output one is programmed for a .5v to 4.5 volt output and sensor two is programmed for 4.5 to .5 volt output. As …
-
$37.68
Water temperature sender 1/2″ NPT – GSWT1/2
Add to CartThis analog temperature sender works specifically with Livorsi analog 100-250° F Water Temperature gauges. This sender connects to the engine block with a 1/2″ NPT thread. When installing the sender for your gauge onto the engine, do NOT use any sealant …
-
$225.12
NMEA 0183 10Hz GPS antenna – GPSSQ310X
Add to CartThis standard GPS antenna is supplied with ring terminals. These antennas easily connect to all Livorsi analog GPS speedometers. Operating at 10Hz, this unit outputs NMEA 0183 messages at 38,400 baud, or simply put, updating your speed ten times per second. This …