-
$222.72
NMEA 0183 1Hz GPS antenna for Livorsi Vantage View Gauges – GPSRAQ3VV
Add to CartThis Vantage View GPS antenna is manufactured with Deutsch terminals on the power and ground supply wires and a butt connector on the data signal wire. This antenna easily connects to all Livorsi Vantage View master tachometers for easy installation. …
-
$409.81
4 5/8″ 80 MPH GPS Speedometer Gauge – GPSL80
Select optionsLivorsi Mega and Race series 80 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufctured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi GPS antenna (…
-
$409.81
4 5/8″ 50 MPH GPS Speedometer Gauge – GPSL50
Select optionsLivorsi Mega and Race series 50 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
$409.81
4 5/8″ 60 MPH GPS Ski Speedometer Gauge – GPSL60
Select optionsLivorsi Mega and Race series 60 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
$409.81
4 5/8″ 200 MPH GPS Speedometer Gauge – GPSL200
Select optionsLivorsi Mega and Race series 200 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 180 MPH GPS Speedometer Gauge – GPSL180
Select optionsLivorsi Mega and Race series 180 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 160 MPH GPS Speedometer Gauge – GPSL160
Select optionsLivorsi Mega and Race series 160 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 140 MPH GPS Speedometer Gauge – GPSL140
Select optionsLivorsi Mega and Race series 140 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 120 MPH GPS Speedometer Gauge – GPSL120
Select optionsLivorsi Mega and Race series 120 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 100 MPH GPS Speedometer Gauge – GPSL100
Select optionsLivorsi Mega and Race series 100 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$238.67
NMEA 0183 10Hz GPS 8 and 16k pulse output antenna – GPSESQ3
Add to CartThis unique GPS antenna converts a GPS NMEA 0183 signal to standard automotive speedometer pulse output. There are two settings for this pulse antenna; it can output 8k or 16k pulses per mile, depending on how you wire the antenna to …
-
$62.93
11″ Stainless steel grab handle – GHSSS11
Select options This product has multiple variants. The options may be chosen on the product pageThis stainless steel grab handle has an overall length of 11 ¾” and welded stainless steel mounting studs at 10.5″ on center. This handle is available in polished stainless steel or standard Livorsi powder coat finishes.
-
$124.04
7″ billet grab handle – GHAS7
Select options This product has multiple variants. The options may be chosen on the product pageThis billet aluminum grab handle is machined from ¾” thick extruded aluminum bar, polished, and available in all 12 powder coat finishes. This handle is 7″ long, stands 2.25″ tall, and has 5/16″-18 tapped mounted holes that are on 4.95″ centers.
-
$153.65
12″ billet grab handle – GHAS12
Select options This product has multiple variants. The options may be chosen on the product pageThis billet aluminum grab handle is machined from ¾” thick extruded aluminum bar, polished, and available in all 12 powder coat finishes. This handle is 11.438″ long, stands 2.5″ tall, and has 5/16″-18 tapped mounted holes that are on 10″ centers.
-
$77.00
Standard potot tube – GCT1
Add to CartStndard 7″ long stainless steel pitot tube
-
$5.96
Speedo fitting 1/4″ NPT TO 1/8″ – GCSM18
Add to CartMade from brass, this fitting has 1/4″ NPT female threads on one side and a 1/8″ male push-on hose fitting on the other.
-
$7.44
1/8″ ID hose blade fitting – GCPM18
Add to CartMade from bass, this fitting has a 5/16-24 thread to a 1/8″ push on mail hose fitting on the other end.
-
$4.46
1/8″ NPT X 1/8″ barb female – GCSF18
Add to CartMade from brass, this fitting has 1/8″ NPT female threads on one side and a 1/8″ male push-on hose fitting on the other.
-
$2.48
1/8″ ID push on speedometer hose – GCH18
Add to CartIdeal for pitot-style speedometers, 1/8″ ID push-on hose is sold by the foot.
-
$84.76
Pitot tube mount – GCM3
Add to CartStainless steel pittot tube mount for GCT1 pitot tube.
-
$4.96
Speedo hose 1/4″ inner diameter push-on – GCH14
Add to CartIdeal for pitot-style speedometers, 1/4″ ID push-on hose is sold by the foot.
-
$10.40
1/8 NPT x 1/4 push-on 90 degree – GCF6
Add to CartThis 90-degree brass fitting has 1/8″ NPT male fittings on one side and 1/4″ push-on hose fittings on the other side
-
$5.22
AN #4 hose fitting x 1/8″ NPT – GCF4
Add to CartThis brass fitting has 1/8″ NPT female threads on one side and a 1/4″ push-on hose connection on the other. This fitting is ideal for a Livorsi mechanical gauge.
-
$4.46
AN #4 hose fitting for 1/4″ hose – GCF1
Add to CartThis brass fitting has #4 female threads on one side and 1/4 push on hose fitting on the other.
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.