-
$4.46
AN #4 hose fit adapter/speedo – GCF2
Add to CartThis fitting is made from brass with 1/4″ NPT female threads on one side and #4 fitting on the other
-
$13.43
LinkUp sensor side harness – GATEWAYVHARNESSBT
Add to CartThis harness goes on the sensor side of the gateway, it connects with an AMP connector and has bullet connectors on the other end.
-
$25.98
LinkUp LED indicator interface harness for single device – GATEWAYVHARNESS1
Add to CartThis harness is made for setups where you’re using a LinkUp NMEA 2000® gateway with a single-slot Livorsi Marine adjustable LED indicator. Since the LinkUp gateway is programmed using your smartphone, it’s often easier to install it near the dash instead …
-
$32.39
LinkUp LED indicator interface harness for twin device – GATEWAYVHARNESS2
Add to CartThis harness is specifically for applications when the Link Up NMEA 2000 gateway is used with a two-slot Livorsi Marine adjustable LED indicator. Since the Link Up gateway requires programming via your smartphone, it could be more convenient to mount the …
-
$198.81
LinkUp NMEA 2000 gateway – GATEWAYV
Add to CartThe LinkUp Gateway makes it easy to connect things like fuel level sensors, trim tabs, rudder angles, and engine data to your boat’s NMEA 2000® system. If you’re adding new electronics or upgrading old wiring, this device helps turn those …
-
$24.07
GPS recall switch bezel – FLGPSRS
Select options This product has multiple variants. The options may be chosen on the product pageThe GPS recall switch bezel is machined from aluminum and available in all 12 Livorsi standard colors.
-
$38.26
4″ gauge to 3 3/8″ gauge adapter bezel – FLGPS
Select options This product has multiple variants. The options may be chosen on the product pageThis gauge bezel is a great solution when upgrading your dash to Livorsi gauges, but your boat has a 4″ hole for a speedometer and tachometer. This bezel has an inside diameter of 3 3/8″ to center your Livorsi gauge, a machined lip …
-
$53.81
4 5/8″ flat polished stainless steel gauge bezel – FL458SS
Add to CartThis flat polished stainless 4 5/8″ gauge bezel has a 4 5/8″ cutout and a 5 11/16″ outside diameter.
-
$53.81
4 5/8″ flat gauge bezel – FL458
Select options This product has multiple variants. The options may be chosen on the product pageThis flat 4 5/8″ gauge bezel has a 4 5/8″” cutout and a 5 1/2″ outside diameter. Making it ideal for Livorsi tachometers and speedometers. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
$16.15
3/4″ flat ignition switch bezel – FL34
Select options This product has multiple variants. The options may be chosen on the product pageThis flat ignition switch bezel has a 3/4″ cutout and a 15/16″ outside diameter. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
$36.83
3 3/8″ flat polished stainless steel gauge bezel – FL338SS
Add to CartThis flat polished stainless 3 3/8″ gauge bezel has a 3 3/8″ cutout and a 3 3/4″ outside diameter.
-
$28.32
3 3/8″ flat gauge bezel – FL338
Select options This product has multiple variants. The options may be chosen on the product pageThis flat 3 3/8″ gauge bezel has a 3 3/8″ cutout and a 4 1/4″ outside diameter. Making it ideal for Livorsi tachometers and speedometers. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
$29.74
2 5/8″ flat polished stainless steel gauge bezel – FL258SS
Add to CartThis flat 2 5/8″ gauge bezel has a 2 5/8″ cutout and a 3 1/4″ outside diameter. Machined from billet aluminum it is available in all standard Livorsi colors.
-
$25.49
2 5/8″ flat gauge bezel – FL258
Select options This product has multiple variants. The options may be chosen on the product pageThis flat 2 5/8″ gauge bezel has a 2 5/8″ cutout and a 3 1/4″ outside diameter. Machined from billet aluminum it is available in all standard Livorsi colors.
-
$26.10
2 1/16″ flat polished stainless steel gauge bezel – FL216SS
Add to CartThis flat polished stainless 2 1/16″ gauge bezel has a 2 1/16″ cutout and a 2 13/16″ outside diameter.
-
$19.82
2 1/16″ flat gauge bezel – FL216
Select options This product has multiple variants. The options may be chosen on the product pageThis flat 2 1/16″ gauge bezel has a 2 1/16″ cutout and a 2 3/4″ outside diameter. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
Price range: $9.18 through $10.31
Foot throttle bracket, angled – EFPAMP
Select optionsThis angled bracket is designed to perfectly complement Livorsi’s billet drive-by-wire foot throttle, providing a secure and ergonomic mounting solution. Formed from durable marine-grade aluminum and finished with a clear anodized coating, it offers both corrosion resistance and a …
-
$102.00
Red hole-in-the-middle (HTM) fender, large – FENDHTM2RD
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-2 fender measures 8.5″ in diameter x 20.5″ tall and is recommended for boats 25’ to 30’. The HTM design is versatile, connects strongly, and can …
-
$102.00
Platinum hole-in-the-middle (HTM) fender, large – FENDHTM2PL
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-2 fender measures 8.5″ in diameter x 20.5″ tall and is recommended for boats 25’ to 30’. The versatile HTM design makes a strong connection and …
-
$102.00
Black hole-in-the-middle (HTM) fender, large – FENDHTM2BK
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-2 fender measures 8.5″ in diameter x 20.5″ tall and is recommended for boats 25’ to 30’. The HTM design is versatile, connects strongly, and can …
-
$102.00
Blue hole-in-the-middle (HTM) fender, large – FENDHTM2BL
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-2 fender measures 8.5″ in diameter x 20.5″ tall and is recommended for boats 25’ to 30’. The HTM design is versatile, makes a strong connection, …
-
$78.00
Red hole-in-the-middle (HTM) fender, small – FENDHTM1RD
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-1 fender measures 6.3″ in diameter x 15.5″ tall and is recommended for boats 20’ to 25’. The HTM design is versatile, makes a strong connection, …
-
$78.00
Platinum hole-in-the-middle (HTM) fender, small – FENDHTM1PL
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-1 fender measures 6.3″ in diameter x 15.5″ tall and is recommended for boats 20’ to 25’. The HTM design is versatile, makes a strong connection, …
-
$78.00
Blue hole-in-the-middle (HTM) fender, small – FENDHTM1BL
Add to CartPolyform hole in the middle are made in the USA with the best quality and performance available. The HTM-1 fender measures 6.3″ in diameter x 15.5″ tall and is recommended for boats 20’ to 25’. The HTM design is versatile, makes a strong connection, …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.