-
$76.73
0-100 PSI oil pressure sender with isolated ground – GSOPI
Add to CartThis analog 0-100 PSI oil pressure sender works specifically with Livorsi analog 0-100 PSI pressure gauge.This sender connects to the engine block with a 1/8″ NPT thread. This sender does not get it’s ground from the engine block, rather it …
-
$66.57
0-100 PSI oil pressure sender – GSOP
Add to CartThis analog 0-100 PSI oil pressure sender works specifically with Livorsi analog 0-100 PSI pressure gauge.This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge onto the engine, do NOT use …
-
$107.13
0 to 15 PSI fuel pressure sender – GSFPWP
Add to CartThis analog 0-15 PSI fuel or water pressure sender works specifically with the Livorsi analog 0-15 PSI fuel pressure gauge. This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge onto the …
-
$106.23
0-60 or 90 PSI fuel pressure sender – GSFP6090
Add to CartThis analog 0-60 or 0-90 PSI fuel pressure sender works specifically with the Livorsi analog 0-60 or 0-90 PSI fuel pressure gauge. This sender connects to the engine block with a 1/8″ NPT thread. When installing the sender for your gauge …
-
$225.12
NMEA 0183 10Hz GPS antenna – GPSSQ310X
Add to CartThis standard GPS antenna is supplied with ring terminals. These antennas easily connect to all Livorsi analog GPS speedometers. Operating at 10Hz, this unit outputs NMEA 0183 messages at 38,400 baud, or simply put, updating your speed ten times per second. This …
-
$185.70
NMEA 0183 1Hz GPS antenna – GPSSQ3
Add to CartThis standard GPS antenna is supplied with ring terminals. These antennas easily connect to all Livorsi analog GPS speedometers. Operating at 1Hz, this unit outputs NMEA 0183 data at 4800 baud, 8 data bits,1 stop bit, no parity (NMEA 0183 standard), or simply put …
-
$35.98
GPS recall plate – GPSSP
Select options This product has multiple variants. The options may be chosen on the product pageAll Livorsi GPS speedometers have a highest-speed recall feature. The gauge comes from the factory with a white recall plate with recall and erase labeled on the plate. These plates are available in all 12 Livorsi standard colors and can be …
-
$355.38
3 3/8″ 60 MPH GPS Ski Speedometer Gauge – GPSS60
Select optionsLivorsi Mega and Race series 60 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges aremanufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi GPS …
-
$355.38
3 3/8″ 80 MPH GPS Speedometer Gauge – GPSS80
Select optionsLivorsi Mega and Race series 80 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 50 MPH GPS Speedometer Gauge – GPSS50
Select optionsLivorsi Mega and Race series 50 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 200 MPH GPS Speedometer Gauge – GPSS200
Select optionsLivorsi Mega and Race series 200 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 180 MPH GPS Speedometer Gauge – GPSS180
Select optionsLivorsi Mega and Race series 180 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 160 MPH GPS Speedometer Gauge – GPSS160
Select optionsLivorsi Mega and Race series 160 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 140 MPH GPS Speedometer Gauge – GPSS140
Select optionsLivorsi Mega and Race series 140 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$222.72
NMEA 0183 1Hz GPS antenna for Livorsi Vantage View Gauges – GPSRAQ3VV
Add to CartThis Vantage View GPS antenna is manufactured with Deutsch terminals on the power and ground supply wires and a butt connector on the data signal wire. This antenna easily connects to all Livorsi Vantage View master tachometers for easy installation. …
-
$355.38
3 3/8″ 120 MPH GPS Speedometer Gauge – GPSS120
Select optionsLivorsi Mega and Race series 120 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$355.38
3 3/8″ 100 MPH GPS Speedometer Gauge – GPSS100
Select optionsLivorsi Mega and Race series 100 MPH GPS speedometer gauge has a standard size 3 3/8″ cut out and an overall diameter of 3 3/4″. These gauges are manufactured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi …
-
$409.81
4 5/8″ 80 MPH GPS Speedometer Gauge – GPSL80
Select optionsLivorsi Mega and Race series 80 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufctured in the USA with non-corrosive materials and easy to install connectors. This gauge requires a Livorsi GPS antenna (…
-
$409.81
4 5/8″ 60 MPH GPS Ski Speedometer Gauge – GPSL60
Select optionsLivorsi Mega and Race series 60 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
$409.81
4 5/8″ 50 MPH GPS Speedometer Gauge – GPSL50
Select optionsLivorsi Mega and Race series 50 MPH GPS speedometer gauge has a 4 5/8″ cut out and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) …
-
$409.81
4 5/8″ 200 MPH GPS Speedometer Gauge – GPSL200
Select optionsLivorsi Mega and Race series 200 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 180 MPH GPS Speedometer Gauge – GPSL180
Select optionsLivorsi Mega and Race series 180 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 140 MPH GPS Speedometer Gauge – GPSL140
Select optionsLivorsi Mega and Race series 140 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are made in the USA with non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
-
$409.81
4 5/8″ 160 MPH GPS Speedometer Gauge – GPSL160
Select optionsLivorsi Mega and Race series 160 MPH GPS speedometer gauge has a 4 5/8″ cutout and an overall diameter of 5″. These gauges are manufactured in the USA using non-corrosive materials and easy-to-install connectors. This gauge requires a Livorsi GPS antenna (not included) but …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.