-
$359.19
Replacement hydraulic cylinder assembly – TTCYLASSYBK
Add to CartThis is a complete trim tab cylinder assembly for a Livorsi hydraulic trim tab. This cylinder is fully assembled, it includes the BATTSACYL (Cylinder shaft anode) and 2 TTHH Hydraulic lines. Comes in black powder coat color over hard black anodized …
-
$24.62
Bulkhead fitting, J512 inverted flare 4.25″ – TTBHF
Add to CartStandard length hydraulic bulkhead fitting. 4.25 Length with J512 Inverted flare fittings. Made from 316 Stainless
-
$92.58
Livorsi trim tab auto-retract kit – TTARK
Add to CartProtect your investment from unnecessary damage. When the ignition is switched to the off position the auto retract kit will automatically fully retract (Raise) you trim tabs from any position to avoid damage. A must if utilizing forklift in and …
-
$320.22
Severe duty trim tab position sensor replacement kit – TTAN9ASYBKSD
Add to CartThe severe duty sensor kit is used on vessels being operated in harsh conditions. A must for vessels that stay docked in salt water. The kit includes a replacement Velocity sensor and magnet assembly. The Kit includes all necessary hardware …
-
$263.24
Trim tab position sensor replacement kit – TTAN9ASYBK
Add to CartThe kit includes a replacement Velocity sensor and magnet assembly. The Kit includes all necessary hardware needed for installation
-
$200.99
Single trim switch, wired with front and back plate – TSSWPB
Select options This product has multiple variants. The options may be chosen on the product pageSingle trim switch for Livorsi Marine DTS and performance throttles. The switch has the wires soldered in place and installed into a new switch plate. This kit also comes with the rear switch plate; both plates are available in all …
-
Price range: $124.71 through $131.28
Single trim switch with wires and plate – TSSWP
Select options This product has multiple variants. The options may be chosen on the product pageSingle trim switch for Livorsi Marine DTS and performance throttles. The switch has the wires soldered in place and installed into a new switch plate. The plate is available in all standard Livorsi colors.
-
$46.73
Single trim switch with wires – TSSW
Add to CartSingle trim switch for Livorsi Marine DTS and performance throttles. The switch has the wires soldered in place, ready for installation onto your existing switch plate.
-
$11.81
Rubber boot for toggle switch – TSRB
Select options This product has multiple variants. The options may be chosen on the product pageThread on rubber boots that fit all Livorsi toggle switches available in black, orange, red, blue, white, yellow, or purple. Please note these boots only fit on standard toggle witches and not the circuit breaker toggle switches.
-
$9.39
On / off / on toggle switch – TSNFN
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a on / off / on switch
-
$7.82
Oon / off toggle switch – TSNF
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a on / off switch.
-
$10.95
Momentary on / off / momentary on toggle switch – TSMFM
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a momentary on / off / momentary on switch
-
$11.68
Momentary on / off toggle switch – TSMF
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a momentary on / off switch.
-
$205.64
Dual trim switch wired with front and back plate – TSDWPB
Select options This product has multiple variants. The options may be chosen on the product pageDual trim switches for Livorsi Marine DTS and performance throttles. The switch has the wires soldered in place and installed into a new switch plate. This kit also comes with the rear switch plate; both plates are available in all …
-
Price range: $74.05 through $377.57
Stainless steel braided trim tab line – SSBH
Select options This product has multiple variants. The options may be chosen on the product pageHoses include One 90 Deg and One straight 3/16th Double flare Stainless fitting. Sold separately. Available in 30, 36, 48, 60, 72 and 90 Inches. 19, 21 And 26 feet. Part number is SSBH+Length
-
Price range: $0.00 through $141.61
Dual throttle trim switch assembly with front plate – TSDWP
Select options This product has multiple variants. The options may be chosen on the product pageReplacement or upgrade dual trim switch panel with wire harnesses. If your billet-style Livorsi Marine throttle switch panel needs to be replaced, the TSDWP is a direct replacement. It has the wires already soldered onto the switches and is ready …
-
$25.34
On / off / momentary on double pole double throw toggle switch – TSDNFN
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a double pole double throw and functions as on / off / on.
-
$41.74
Momentary on / off / momentary on double pole double throw toggle switch – TSDMFM
Add to CartThis standard size toggle switch requires a 1/2″ cutout and can handle up to 25 amps at 12 volts DC. This switch is a double pole double throw and functions as momentary on / off / momentary on.
-
$19.38
Toggle switch safety cover – TSC
Add to CartThe Toggle Safety Cover. The Red Guard Cover prevents accidental toggle switch activation. The toggle switch can be activated only after you flip the switch guard cover. And the switch will turn OFF automatically when you close the cover. Made …
-
$23.85
316 polished stainless steel garbord drain – TDP
Add to CartPolished stainless garboard drain plug with three countersunk installation holes. This part includes the drain that gets installed into the boat as well as the threaded plug.
-
$38.76
Thru hull fitting – THF218
Add to CartThis stainless steel through-hull fitting is designed for a clean, professional installation in high-performance and stepped-hull applications. Measuring 2 inches in length with a 1/8″ NPT inlet connection, it provides a secure and low-profile solution for mounting speedo kick-ups, water discharge, or …
-
$9.03
Toggle breaker switch boot 1/2 – TBSBW
Add to CartTOGGLE BREAKER SWITCH WEATHER BOOT 1/2 / WHITE
-
$9.04
Toggle breaker switch boot 1/2 – TBSBBK
Add to CartTOGGLE BREAKER SWITCH WEATHER BOOT 1/2 / BLACK
-
Price range: $70.06 through $84.05
Circuit breaker toggle switches – TBS
Select options This product has multiple variants. The options may be chosen on the product pageCircuit breaker toggle switches come in 5, 10, 15, 20 and 30 amp options. They require a ½” hole for mounting and they come with all the required mounting hardware. Also available are optional rubber booths that tread over the switch available in black or white, …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.